DTC P1623: Ignition Switch Circuit Low
- Check the ''On Board Diagnostic (OBD) System Check''.
Was the OBD System Check performed?
YES – Go to step 2.
NO – Go to OBD System Check. 
- Check the ignition switch circuit (ECM terminal No. 58).
Was a problem found?
YES – Repair the ignition switch circuit.
NO – Substitute a known-good ECM and recheck. If symptom/indication goes away, replace the original ECM.
| NOTICE |
The battery power supply short circuit to 5 V power supply damages the ECM.
