Maintenance Schedule for Normal Conditions

(Australian and New Zealand Models)

3-6  

Listed by Distance/Time

Follow the Normal Conditions Maintenance Schedule if the severe driving conditions specified in the Severe Conditions Maintenance Schedule on 3-8 and 3-9 do not apply.

Service at the indicated distance or time whichever comes first. km x 1,000 20 40 60 80 100 120 140 160 180 200
miles x 1,000 12 24 36 48 60 72 84 96 108 120
months 12 24 36 48 60 72 84 96 108 120
Replace engine oil Every 10,000km (6,000 miles) or 12 months
Replace engine oil filter
Replace air cleaner element          
Inspect valve clearance          
Replace fuel filter          
Replace spark plugs          
Replace timing belt and inspect water pump                
Inspect and adjust drive belts          
Inspect idle speed                
Replace engine coolant 200,000 km (120,000 miles) or 120 months, thereafter every 100,000 km (60,000 miles) or 60 months
Replace transmission fluid Manual Transmission                  
Automatic Transmission 120,000 km (72,000 miles) or 96 months, thereafter every 80,000 km (48,000 miles) or 48 months
Inspect front and rear brakes
Replace brake fluid Every 36 months
Check parking brake adjustment        
Check light alignment
Test drive (noise, stability, dashboard operation)
Visually inspect the following items:
Tie rod ends, steering gearbox and boots
Suspension components
Driveshaft boots
Brake hoses and lines (including ABS)
All fluid levels and condition of fluid
Exhaust system
Fuel line and connections
Tyre condition

aaa