Standards and Service Limits

Honda Multi Matic Transmission and HMM Differential (cont'd)

 2-27  

Item Measurement Qualification Standard or New Service Limit
HMM differential carrier Pinion shaft contact area I.D.   18.010-18.028 mm

(0.709-0.710 in.)

 -
Carrier-to-pinion shaft clearance   0.023-0.057 mm

(0.001-0.002 in.)

 0.1 mm (0.004 in.)
Driveshaft contact area I.D.   26.025-26.045 mm

(1.0246-1.0254 in.)

 -
Carrier-to-driveshaft clearance   0.045-0.086 mm

(0.002-0.003 in.)

 0.12 mm (0.005 in.)
Set ring-to-carrier bearing outer race clearance   0-0.15 mm

(0-0.006 in.)

 Adjust
HMM differential pinion gear Backlash   0.08-0.15 mm

(0.003-0.006 in.)

 -
I.D.   18.042-18.066 mm

(0.7103-0.7113 in.)

 -
Pinion gear-to-pinion shaft clearance   0.055-0.095 mm

(0.0022-0.0037 in.)

 0.15 mm (0.006 in.)

aaa