NOTE: Put on gloves to protect your hands. Raise the glass fully. Remove these items: Door panel (see page 20-4) Plastic cover, as necessary (see page 20-2) Pull the glass run channel (A) away as necessary and remove the bolt, then remove the centre lower channel (B) by pulling it downward. Fastener Locations : Bolt, 1

On driver's and some passenger's: Release the retainer clip (A), then remove the lock cylinder (B). Disconnect the cylinder rod (C). With cylinder switch: Remove the screw, then separate the lock cylinder (A) and cylinder switch (B). Fastener Locations : Screw, 1 aaa