NOTE: Take care not to scratch the body or tear the seat covers.

Remove the rear seat as shown. To remove the seat-back, remove the front portion of the trunk floor mat (see page 20-31).

Install the seat in the reverse order of removal, and note these items:

• Before installing the centre anchor bolts on the seat-back with the centre shoulder belt, make sure there are no twists or kinks in the belt.
• Make sure the seat-backs lock securely.

Fastener Locations

A : Bolt, 2 B : Bolt, 1 C : Bolt, 1 D : Clip, 2

PIVOT BUSHING CENTRE BELT (For some models) RIGHT SEAT-BACK CENTRE PIVOT BOLT 8 x 1.25 mm 22 Nm (2.2 kgf/m, 16 lbf/ft) 8 x 1.25 mm 22 Nm (2.2 kgf/m, 16 lbf/ft) HINGE COVER SEAT-BACK CENTRE HINGE BUSHING LEFT SEAT-BACK HOOK CLIP PIVOT BUSHING 6 x 1.0 mm 9.8 Nm (1.0 kgf/m, 7.2 lbf/ft) SLITS HOOK SEAT CUSHION SEAT BELT BUCKLE CLIP CENTRE ANCHOR BOLT 7/16-20 UNF 32 Nm (3.3 kgf/m, 24 lbf/ft)