NOTE:

• Put on gloves to protect your hands.
• When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
• Take care not to bend or scratch the trim and panels.
• LHD is shown, RHD is symmetrical.

Remove the trim as shown. To remove the door sill trim and centre-pillar upper trim, remove the rear side trim panel as necessary (see page 20-30).

Install the trim in the reverse order of removal and note these items:

• Replace any damaged clips.
• Before installing the anchor bolts, make sure there are no twists or kinks in the belts.

Fastener Locations

A : Clip, 2 B : Clip, 3 C : Clip, 7

       (Black)          (White)

CENTRE PILLAR UPPER TRIM FRONT SEAT BELT UPPER ANCHOR BOLT 7/16-20 UNF 32 Nm (3.3 kgf/m, 24 lbf/ft) FRONT PILLAR TRIM DOOR OPENING TRIM UPPER ANCHOR COVER FRONT SIDE CAP KICK PANEL DOOR SILL TRIM FRONT SEAT BELT LOWER ANCHOR BOLTS 7/16-20 UNF 32 Nm (3.3 kgf/m, 24 lbf/ft) REAR SIDE TRIM PANEL To body.