Bumpers
Front Bumper Removal/Installation
|
20-8 |
|
NOTE:
- Have an assistant help you when removing and installing the front bumper.
- Take care not to scratch the front bumper and body.
- Put on gloves to protect your hands.
Remove the front bumper as shown.
Install the bumper in the reverse order of removal and note these items:
- If equipped, make sure the headlight washer tube is connected properly.
- Make sure the front bumper engages the hooks of the side spacers and upper beams on both sides securely.
- Replace any damaged clips.
Fastener Locations
A
: Screw, 2 B : Screw, 2 C
: Bolt, 4 D : Clip, 7 E : Clip, 2
|
- HOOKS
- HOOKS
- SIDE SPACER
- UPPER BEAM
- FRONT INNER FENDER
- FRONT BUMPER
- HEADLIGHT WASHER TUBE
(For some models)
- FRONT AIR SPOILER
- 6 x 1.0 mm
9.8 Nm (1.0 kgf/m, 7.2 lbf/ft)
- AIR SPOILER PLATE
- PLATE
- SPOILER
- BUMPER
|
