NOTE:

• Identify parts as they are removed to ensure reinstallation in original location.
• Inspect the rocker shafts and rocker arms, refer to the '01 Civic Shop Manual on this CD (see page 6-38).
• The rocker arms must be installed in the same positions if reused.
• When removing or installing the rocker arm assembly, do not remove the camshaft holder bolts. The bolts will keep the holders, springs and rocker arms on the shaft.
• Prior to reassembling, clean all the parts in solvent, dry them and apply lubricant to any contact points.

D17A8 engine:

COLLAR Letter "B" is stamped on the rocker arm INTAKE ROCKER ARM B INTAKE ROCKER SHAFT INTAKE ROCKER ARM A Letter "A" is stamped on the rocker arm SPRING No. 1 CAMSHAFT HOLDER EXHAUST ROCKER ARM A Letter "A" is stamped on the rocker arm EXHAUST ROCKER SHAFT Letter "B" is stamped on the rocker arm SPRING EXHAUST ROCKER ARM B No. 5 CAMSHAFT HOLDER No. 4 CAMSHAFT HOLDER No. 3 CAMSHAFT HOLDER No. 2 CAMSHAFT HOLDER