Rear Side Outer Panel Removal (5D)
Rear Side Outer Panel Removal
- Cut and remove the rear side outer panel.
- Check the rear pillar gutter and middle gutter positions, and check for damage. If necessary replace them.
- When removing the wheel arch separator, and glue the urethane block at the separator mounted position, and plug the hole of the wheel arch extension.
QUARTER PILLARSEPARATOR
(Inside of guarter pillar
stiffener)REAR INNER
PILLARQUARTER PILLAR
STIFFENERWHEEL ARCH
SEPARATOROUTER PANELCut line.REAR PILLAR
GUTTERMIDDLE
GUTTERREAR PANELREAR PILLAR
LOWER STIFFENERREAR FLOORREAR INNER
PANELWHEEL ARCH
EXTENSION