Rear Floor/Rear Floor Cross-member Removal
Rear Floor/Rear Floor Cross-member Removal
Cut the rear floor 15 mm (0.6 in.) from the welded flange of the rear floor cross-member.
NOTE: Do not cut the rear frame stiffener.
If necessary, cut the rear frame, and replace the rear floor cross-member.
REAR FRAMESTIFFENER15 mm (0.6in.)REAR FLOORREAR FLOOR
CROSS-MEMBERREAR FLOOR
CROSS-MEMBERCut line.JUCK-UP STIFFENER
SUPPORTREAR FLOORCut line.REAR FRAME[X][VIEW: X]REAR FLOOR
CROSS-MEMBER