Interior Trim Removal/Installation - Trunk Area (5D)

Interior Trim Removal/Installation - Trunk Area

NOTE:

• Put on gloves to protect your hands.
  
• When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
  
• Take care not to bend or scratch the trim and panels.
  

1.	Remove the trim as shown. Unlock the trunk floor lid to remove it.

2.

Install the trim in the reverse order of removal, and replace any damaged clips. TRUNK FLOOR LIDBFastener LocationsA: Clip, 8B: Clip, 2BFRONT CARGO FLOOR6 x 1.0 mm 9.8 N·m (1.0 kgf·m, 7.2 lbf·ft)RIGHT REAR FLOOR SIDE BOXREAR FLOOR BOX (With spare tyre)TOOL BOX (With spare tyre)REAR TRIM PANELTOOL BOX (Without spare tyre)REAR FLOOR BOX (Without spare tyre)LEFT REAR FLOOR SIDE BOXAAAAAAAA