Rear Bumper Removal/Installation (5D)

Rear Bumper Removal/Installation

NOTE:

• Have an assistant help you when removing and installing the rear bumper.
  
• Take care not to scratch the rear bumper and body.
  
• Put on gloves to protect your hands.
  

1.	Remove the rear bumper as shown.

2.

Install the bumper in the reverse order of removal, and note these items: Make sure the rear bumper engages the hooks of the side spacers, side brackets and upper brackets on both sides securely. Replace any damaged clips. Fastener Locations: Bolt, 4: Screw, 2: Screw, 4: Clip, 2ABCDSIDE SPACERREAR UNDER COVERREAR BUMPERCAP6 x 1.0 mm 9.8 N·m (1.0 kgf·m, 7.2 lbf·ft)HOOKSHOOKS (Nine places)HOOKSREAR INNER FENDERCAPABCDAAABCCCD