Emblem/Sticker Replacement (5D)

Emblem/Sticker Replacement

NOTE: When removing the emblems/sticker, take care not to scratch the body.

1.	Clean the body surface with a sponge dampened in alcohol. After cleaning, keep oil, grease, and water from getting on the surface.

Apply the emblem/sticker where shown. When installing the rear i-VTEC sticker on the rear window, place the application tape beside the edge of the rear window as shown, and center it, then press the sticker into place, and remove the application tape.

REAR ''H'' EMBLEMACCORD
EMBLEMUnit: mm (in.)Adhesive tapeREAR ''H'' EMBLEMADHESIVE TAPEACCORD EMBLEM20.5
(0.81)18
(0.71)18
(0.71)Edge of the tailgate lower trim.i-VTEC STICKERTYPE ''S'' EMBLEMREAR ''H'' EMBLEM/ACCORD EMBLEM: 3M4213E, or equivalent
TYPE ''S'' EMBLEM: 3M4213, or equivalentACCORD EMBLEM25
(0.98)TYPE ''S''
EMBLEMEdge of the
rear windowAPPLICATION TAPEi-VTEC STICKERCenter line4.5
(0.18)Edge of
the tailgate
lower trim.16
(0.63)71
(2.8)Body lineCenter line62
(2.4)