Rear Seat-back Latch Replacement (4D)

Rear Seat-back Latch Replacement

NOTE:

• When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
  
• Take care not to bend or scratch the interior trim.
  

1.	Remove these items: Seat side bolster, both sides Rear shelf

2.	Remove the bolts, then remove the seat-back latch. Fastener Locations: Bolt, 26 x 1.0 mm 9.8 N·m (1.0 kgf·m, 7.2 lbf·ft)

3.	Install the latch in the reverse order of removal. Make sure the seat-back locks securely and unlocks properly.