Trunk Lid Opener Switch Replacement (4D)

Trunk Lid Opener Switch Replacement

NOTE:

• Take care not to scratch the hatch.
  
• Put on gloves to protect your hands.
  

1.	Remove these items: Trunk lid trim Rear License Trim

2.	Remove the bolts and disconnect the connector (A), then remove the trunk lid switch (B). B6 x 1.0 mm 9.8 N·m (1.0 kgf·m, 7.2 lbf·ft)AFastener LocationsA: Bolt, 2

3.	Install the switch in the reverse order of removal, and note these items: Make sure the connector is plugged in properly. Make sure the trunk lid opens properly.