Audio Unit Connector Replacement (With Navigation Type)
Audio Unit Connector Replacement
When replacing an audio unit connector, match the wires to the cavities listed in the following table.
With Navigation, Puremium Audio
NAVIGATION DISPLAY CONNECTORA/C CONNECTORS| Cavity | Wire | Connect to | Cavity | Wire | Connect to |
|---|---|---|---|---|---|
| A1 | YEL/GRN | Radio switch (Amp.) | A11 | BRN | Radio remote switch ground |
| A2 | RED | ACC (main stereo power supply) | A12 | GRN | Navigation unit (RG GND) |
| A3 | PUR [GRN/RED] | Radio remote switch | A13 | WHT/GRN | Navigation unit (RG L+) |
| A4 | RED [RED/BLU] | (Security input) | A14 | WHT/BLU | Navigation unit (RG R+) |
| A5 | LT GRN | Stereo Amplifier (Right rear speaker (+)) | A15 | PUR | Stereo Amplifier (Right rear speaker (-)) |
| A6 | BLU | Stereo Amplifier (Left rear speaker (+)) | A16 | PNK | Stereo Amplifier (Left rear speaker (-)) |
| A7 | RED | Stereo Amplifier (Front passenger's door speaker (+), Right tweeter (+)) | A17 | RED | Stereo Amplifier (Front passenger's door speaker (-), Right tweeter (-)) |
| A8 | RED/BLU | Stereo Amplifier (Driver's door speaker (+), Left tweeter (+)) | A18 | YEL | Stereo Amplifier (Driver's door speaker (-), Left tweeter (-)) |
| A9 | RED/BLK | Lights-on signal | A19 | RED | Dash lights brightness controller |
| A10 | WHT | Constant power | A20 | BLK | Ground (G504) |
| [ ]: | RHD type |
| Cavity | Wire | Connect to | Cavity | Wire | Connect to |
|---|---|---|---|---|---|
| C1 | BLK | Sub display assembly-ground (5V) | C6 | BLU/RED | Sub display assembly-data signal line |
| C2 | BLU | Sub display assembly-5V signal line | C7 | BLU | Sub display assembly-CE signal line |
| C3 | ——— | Not used | C8 | GRY | Sub display assembly-shielding ground |
| C4 | YEL/RED | Sub display assembly-reset signal line | C9 | RED | Sub display assembly-LCD (BL-) signal line |
| C5 | YEL | Sub display assembly-clock signal line | C10 | GRN | Sub display assembly-LCD (BL+) signal line |
6 CD type printed circuit board connector:
| Terminel | Signal | Terminel | Signal |
|---|---|---|---|
| 1 | AUDIO-GND | 6 | VDD 5V |
| 2 | Power switch | 7 | SEC-LED |
| 3 | ILLUMI-GND 4 | 8 | RED-LED |
| 4 | ILLUMI 8V-4 | 9 | GREEN-LED |
| 5 | VOL-B | 10 | VOL-A |
| Terminel | Signal | Terminel | Signal |
|---|---|---|---|
| 1 | ILLUMI-GND-1 | 11 | ILLUMI 8V-1 |
| 2 | ILLUMI-GND-3 | 12 | LCD-CK |
| 3 | ILLUMI 8V-3 | 13 | LCD-CE |
| 4 | ILLUMI-GND-2 | 14 | LCD-DO |
| 5 | ILLUMI 8V-2 | 15 | ACC5V |
| 6 | SET4 | 16 | LCD-GND |
| 7 | SET3 | 17 | LCD8V |
| 8 | SET2 | 18 | AC-DATA |
| 9 | SET1 | 19 | EJECT switch |
| 10 | Not used | 20 | LCD-DI |
10P CONNECTOR20P CONNECTOR