M/T Reverse Lockout Solenoid Test (K24A3 M/T)
M/T Reverse Lockout Solenoid Test
| 1. | Remove the reverse lockout solenoid. |
| 2. | Connect battery positive terminal to the No. 2 terminal of the reverse lockout solenoid 2P connector, and connect the battery negative terminal to the No. 1 terminal. Terminal side of male terminalsREVERSE LOCKOUT SOLENOID2P CONNECTOR |
| 3. | Check that the reverse lockout solenoid operates. |
| 4. | If the reverse lockout solenoid does not work, replace it. |