Torque Converter Housing Mainshaft Bearing and Oil Seal Replacement
Special Tools Required
Adjustable bearing remover set ( 07JAC-PH80000)
Handle driver ( 07749-0010000)
Driver attachment, 62 x 68 mm ( 07746-0010500)
Driver attachment, 72 x 75 mm ( 07746-0010600)
| 1. | Remove the mainshaft bearing and oil seal with the special tool.
 07JAC-PH80000 |
| 2. | Install the new mainshaft bearing until it bottoms in the torque converter housing with the special tools.
 07749-001000007746-0010500 |
| 3. | Install the new oil seal flush with the housing with the special tools.
 07749-001000007746-0010600 |
