Countershaft Speed Sensor Replacement (A/T)
Countershaft Speed Sensor Replacement
| 1. | Disconnect the countershaft speed sensor connector, and remove the countershaft speed sensor. AB6 x 1.0 mm12 N·m (1.2 kgf·m, 8.7 lbf·ft) |
| 2. | Install the new O-ring (A) on the new countershaft speed sensor (B), then install the countershaft speed sensor in the transmission housing. |
| 3. | Check the connector for rust, dirt, or oil, then connect the connector securely. |