A/T Idler Gear Shaft Bearing Replacement (A/T)

A/T Idler Gear Shaft Bearing Replacement

Special Tools Required
Adjustable bearing remover set (  07JAC-PH80000)

Handle driver (  07749-0010000)
Driver attachment, 52 x 55 mm (  07746-0010400)

1.	Remove the idler gear shaft bearing (A) from the end cover (B) with the special tool. 07JAC-PH80000AB

2.	Install the new bearing in the end cover with the special tools. 07749-001000007746-0010400