Honda Accord ESM 2003 · Service Manual Service Manual 2003

A/T Control Shaft Bearing Replacement (A/T)

A/T Control Shaft Bearing Replacement

Special Tools Required
Handle driver (  07749-0010000)

S80WA00S749001T0000000D01
Driver attachment, 22 x 24 mm (  07746-0010800)
S3M2A00S746001T0800000D01



1.Remove the oil seal from the end cover, then remove the bearing.

S9A2E02E10410417254KBAD01

2.Install the new bearing flush to the end cover with the special tools.

S9A2E02E10410417254KBAD0207746-001080007749-0010000

3.Install the new oil seal.