DTC Troubleshooting: 53-1x, 53-2x
DTC Troubleshooting: 53-1x, 53-2x
| DTC 53-1x (53-10 to 53-19, 53-1A to 53-1F), 53-2x (53-20 to 53-29, 53-2A to 53-2F): | Internal Failure of the SRS Unit |
NOTE: Before troubleshooting any of these DTCs, check the battery/system voltage. If the voltage is low, repair the charging system or replace the battery before troubleshooting the SRS. If the battery/system voltage is now OK, ask the customer if the battery ever went dead.
| 1. | Erase the DTC memory. |
| 2. | Turn the ignition switch ON (II), and check that the SRS indicator comes on for about 6 seconds and then goes off. Does the SRS indicator stay on and is DTC 53-1x or 53-2x indicated? YES - Replace the SRS unit.n NO - Intermittent failure, system is OK at this time. Go to Troubleshooting Intermittent Failures. If another DTC is indicated, go to the DTC troubleshooting index for troubleshooting details. |