Honda Accord ESM 2003 · Service Manual Service Manual 2003

Immobilizer Control Unit-Receiver Replacement

Immobilizer Control Unit-Receiver Replacement

1.Remove the dashboard lower cover.

2.Remove the steering column covers.

3.Disconnect the 7P connector (A) from the immobilizer control unit-receiver (B).

SEA3E00J46636234491KBAD01ABC

4.Remove the two screws and the immobilizer control unit-receiver from the ignition key cylinder (C).

5.Install the immobilizer control unit-receiver in the reverse order of removal.

6.After replacement, check the immobilizer system.