Glove Box Lock Cylinder Replacement
Glove Box Lock Cylinder Replacement
NOTE: Take care not to scratch the glove box.| 1. | Remove the glove box. |
| 2. | Insert a flat-tip screwdriver in under the knob (A) while pulling it, and pry the top of the retainer (B) up. NOTE: Do not remove the retainer entirely. Leave the other side of it in the original position when removing and installing the lock cylinder. LHD:  BARHD:  AB |
| 3. | Remove the glove box lock cylinder (A). A |
| 4. | Reinstall the top of the retainer (A) in the original position, then reinstall the lock cylinder (B). Push the cylinder into place securely until the retainer snaps into place. LHD:  BARHD:  AB |