Hood Molding Replacement
Hood Molding Replacement
| 1. | Remove the nuts (A), and detach the clip (B) by pushing it from the drain hole (C) in the hood, then remove the hood molding (D). Take care not to scratch the hood. Fastener Locations: Nut, 4A: Clip, 1BBADCAAA5 x 0.8 mm5 N·m (0.5 kgf·m, 4 lbf·ft) |
| 2. | Install the molding in the reverse order of removal, and replace the clip if it's damaged. |