Front Bumper Removal/Installation

NOTE:

Have an assistant help you when removing and installing the front bumper.
Take care not to scratch the front bumper and body.
Put on gloves to protect your hands.

1.	Remove the front bumper as shown.

Install the bumper in the reverse order of removal, and note these items:

If equipped, make sure the front fog light connector is plugged in properly, and the headlight washer tube is connected properly.
Make sure the front bumper engages the hooks of the side spacers and upper beams on both sides securely.
Replace any damaged clips.

CAAABCDCCCCCCCCHOOKSHOOKS
(Seven places)FRONT
BULKHEAD COVERFRONT INNER
FENDERUPPER BEAMSIDE SPACERFRONT FOG LIGHT
CONNECTOR
(For some models)6 x 1.0 mm
9.8 N·m
(1.0 kgf·m, 7.2 lbf·ft)FRONT BUMPERAHEADLIGHT
WASHER TUBE
(For some models)CEDDCB: Bolt, 4A: Screw, 2B: Clip, 12C: Clip, 3D: Clip, 2EFastener LocationsE