Brake Hoses and Lines Inspection

1.	Inspect the brake hoses for damage, deterioration, leaks, interference, and twisting.

2.	Check the brake lines for damage, rusting, and leaks. Also check for bent brake lines.

3.	Check for leaks at hose and line joints and connections, and retighten if necessary.

Check the master cylinder and ABS modulator unit for damage and leaks.

NOTE: Replace the brake hose clip whenever the brake hose is serviced.

BRAKE LINE-to-BRAKE HOSE
15 N·m (1.5 kgf·m, 11 lbf·ft)MASTER CYLINDER-to-BRAKE LINES
ABS: 15 N·m (1.5 kgf·m, 11 lbf·ft)
VSA: 30 N·m (3.1 kgf·m, 22 lbf·ft)BRAKE HOSE-to-CALIPER
(BANJO BOLT)
34 N·m (3.5 kgf·m, 25 lbf·ft)
BLEED SCREW
9.0 N·m (0.9 kgf·m, 6.5 lbf·ft)ABS MODULATOR UNIT-to-
BRAKE LINES
ABS: 15 N·m (1.5 kgf·m, 11 lbf·ft)
VSA: 30 N·m (3.1 kgf·m, 22 lbf·ft)BRAKE HOSE-to-CALIPER
(BANJO BOLT)
34 N·m (3.5 kgf·m, 25 lbf·ft)
BLEED SCREW
9.0 N·m (0.9 kgf·m, 6.5 lbf·ft)BRAKE LINE-to-BRAKE HOSE
15 N·m (1.5 kgf·m, 11 lbf·ft)BRAKE LINE-to-BRAKE HOSE
15 N·m (1.5 kgf·m, 11 lbf·ft)BRAKE HOSE-to-CALIPER
(BANJO BOLT)
34 N·m (3.5 kgf·m, 25 lbf·ft)
BLEED SCREW
9.0 N·m (0.9 kgf·m, 6.5 lbf·ft)