Honda Accord ESM 2003 · Service Manual Service Manual 2003

Starter Solenoid Test

Starter Solenoid Test

DENSO/MITSUBISHI


1.Check the hold-in coil for continuity between the S terminal and the armature housing (ground). There should be continuity.

  • If there is continuity, go to 2.
  • If there is no continuity, replace the solenoid.

DENSO:

SDA3E92A46500056941FEAD01SM


MITSUBISHI:

SDA3AE4A46500056941FEAD01MS

2.Check the pull-in coil for continuity between the S terminal and M terminal. There should be continuity.

  • If there is continuity, the solenoid is OK.
  • If there is no continuity, replace the solenoid.