ECT Sensor Replacement
ECT Sensor Replacement
| 1. | Remove the air cleaner. |
| 2. | Remove the EVAP canister purge valve. |
| 3. | Unbolt the under-hood fuse/relay box bolt and move assembly aside. |
| 4. | Disconnect the ECT sensor connector (A). B12 N·m (1.2 kgf·m, 8.7 lbf·ft)CA |
| 5. | Remove the ECT sensor (B). |
| 6. | Install the sensor in the reverse order of removal with a new O-ring (C). |