Fuel Pressure Regulator Replacement

Fuel Pressure Regulator Replacement

Except ECONO model:

1.	Remove the fuel pump.

2.	Remove the clip (A). ABCCD

3.	Remove the fuel pressure regulator (B).

4.	Install the regulator in the reverse order of removal with new O-rings (C). Make sure the regulator is installed with the drain hall (D) of the regulator is faced down.

ECONO model:

1.	Remove the fuel pump.

2.	Remove the holder (A). ABC

3.	Remove the fuel pressure regulator (B).

4.	Install the regulator in the reverse order of removal with new O-ring (C). NOTE: Coat the O-ring with clean engine oil.