Radiator and Fans Replacement
Radiator and Fans Replacement
| 1. | Drain the engine coolant. |
| 2. | Remove the lower radiator hose from the radiator. |
| 3. | Remove the automatic transmission fluid (ATF) cooler hoses (A/T). QUICKCONNECTORUPPER RADIATOR HOSERADIATOR CAPRADIATORRADIATOR FAN DRAIN PLUGFAN MOTOR CONNECTORS6 x 1.0 mm 7 N·m (0.7 kgf·m, 5 lbf·ft)UPPER BRACKET AND CUSHIONCONDENSER FAN SHROUD ASSEMBLY6 x 1.0 mm 12 N·m (1.2 kgf·m, 8.7 lbf·ft)LOWER CUSHIONRESERVE TANKO-RING Replace.RADIATOR FAN SWITCH 24 N·m (2.4 kgf·m, 17 lbf·ft)RADIATOR FAN MOTORO-RING Replace.LOWER RADIATOR HOSEO-RING Replace.RADIATOR FAN SHROUD |
| 4. | Remove the upper radiator hose and lower radiator hose from the radiator. |
| 5. | Disconnect the fan motor connectors and radiator fan switch connector. |
| 6. | Remove the upper bracket cushions, then pull up the radiator. |
| 7. | Remove the fan shroud assemblies and other parts from the radiator. |
| 8. | Install the radiator in the reverse order of removal. Make sure the upper and lower cushions are set securely. |
| 9. | Fill the radiator with engine coolant and bleed the air. |