Alternator Replacement

Alternator Replacement

1.	Make sure you have the anti-theft codes, for the radio, and the navigation system, then write down the frequencies for the radio's preset buttons.

2.	Disconnect the negative cable from the battery, and then disconnect the positive cable.

3.	Remove the drive belt.

4.	Remove the auto-tensioner.

5.	Disconnect the alternator connector (A) and BLK wire (B) from the alternator. 6 x 1.0 mm 8 N·m (0.8 kgf·m, 6 lbf·ft)AB

6.	Remove the three bolts securing the alternator. 8 x 1.25 mm 22 N·m (2.2 kgf·m, 16 lbf·ft)

7.	Install the alternator and drive in the reverse order of removal.

8.	Connect the positive cable and negative cable to the battery.

9.	Enter the anti-theft codes for the radio and the navigation system, then enter the customer's radio station preset. Set the clock.

10.	Perform the engine control module (ECM) /powertrain control module (PCM) idle learn procedure, and power window control unit reset procedure.