Rear Seat-back Latch Replacement (5D)

Rear Seat-back Latch Replacement

NOTE:

1.	Tilt the seat-back forward and tip the seat cushion up.

2.	Remove these items: Headrest and center headrest. Cargo net (for some models). Seat-back top cover.

3.	Remove the bolts (A) and nut (B), disconnect the rod (C), then remove the seat-back latch (D) from the seat-back frame.

4.	Install the latch in the reverse order of removal, and note these items: Make sure the rod is connected securely. Make sure the seat-back locks securely and unlocks properly. Make sure the headrest doesn't stand still if the seat-back was unlocked.