Interior Trim Removal/Installation - Rear Side Area
NOTE:
Put on gloves to protect your hands.
When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
Take care not to bend or scratch the trim and panels.
1.
Remove these items:
Trunk floor lid and both trunk side lids
Front cargo floor
Rear trim panel
Rear floor box
Rear door sill trim
2.
Remove the trim as shown:
3.
Install the trim in the reverse order of removal, and note these items:
Replace any damaged clips.
Make sure the trunk compartment light connector and rear accessory power socket connector are plugged in properly.