Rear Door Glass Outer Weatherstrip Replacement (5D)

Rear Door Glass Outer Weatherstrip Replacement

NOTE:

Once you remove the door glass outer weatherstrip, replace it with a new one because it will bend during removal.
Put on gloves to protect your hands.
Take care not to scratch the door.

1.	Remove the door panel.

2.	Remove the screws fastening the door grass outer weatherstrip (A) from both edges of the door.

3.	Pull the door glass outer weatherstrip (A) up at each portion where the inner molding (B) catches the inside edge of the window slot, then remove it.

4.	Install a new weatherstrip in the reverse order of removal.