Parking Brake Shoe Lining Break-in

NOTE: Perform brake linings surface break-in when replacing shoes with new linings and/or new rear brake disc/drum.



Perform this operation in a safe area.



1.Park the vehicle on a firm, level surface.

2.Do the major parking brake adjustment.

3.Do the minor parking brake adjustment.

4.Drive the vehicle at 31 mph (50 km/h).

5.Pull the parking brake lever 88 N (9 kgf, 19.8 lbf) clicks while driving the vehicle for 400 m (1/4 mile).

6.Stop the vehicle and release the parking brake for 5-10 minutes to allow the drums to cool.

7.Repeat steps 4 through 6 three more times.

8.Check the parking brake lever adjustment.