Interior Trim Removal/Installation - Trunk Area
Without Trunk Side Spacer
NOTE:
Put on gloves to protect your hands.
When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
Take care not to bend or scratch the trim and panels.
1.
Remove the trim as shown.
2.
Install the trim in the reverse order of removal, and replace any damaged clips.
With Trunk Side Spacer
NOTE:
Put on gloves to protect your hands.
When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
Take care not to bend or scratch the trim and panels.
1.
Remove the trim as shown.
2.
Install the trim in the reverse order of removal, and replace any damaged clips.