| 1. | Remove the center console and rear console. |
| 2. | Disconnect the shift lock solenoid connector. |
| 3. | Remove the shift lock release lever (A). |
| 4. | Remove the shift lock solenoid. |
| 5. | Install the shift lock solenoid plunger (B) and plunger spring (C) in the new shift lock solenoid (D). |
| 6. | Install the new shift lock solenoid by aligning the joint of the shift lock solenoid plunger with the tip of the shift lock stop (E). |
| 7. | Install the shift lock release lever. |
| 8. | Connect the shift lock solenoid connector, and install the connector on the connector bracket. |
| 9. | Install the center console and rear console. |