| 1. | Remove the center console and rear console. |
| 2. | Disconnect the shift lock solenoid connector. |
| 3. | Connect the battery positive terminal to shift solenoid connector terminal No. 1, and connect the battery negative terminal to terminal No. 2. NOTE: Do not connect power to terminal No. 2 or you will damage the diode inside the solenoid. |
| 4. | Check that the shift lever can be moved from the [P] position. Release the battery terminals from the shift lock solenoid connector. Move the shift lever back to the [P] position, and make sure it locks. |
| 5. | Check that the shift lock releases when the shift lock release is pushed, and check that it locks when the shift lock release is released. |
| 6. | If the shift lock solenoid does not work properly, replace it. |