| 1. | Disconnect the A/T clutch pressure control solenoid valves B and C connectors. |
| 2. | Measure A/T clutch pressure control solenoid valve B resistance at the solenoid valve B connector, and measure A/T clutch pressure control solenoid valve C resistance at the solenoid valve C connector.
|
| 3. | If the resistance of either A/T clutch pressure control solenoid valve is out of standard, replace the A/T clutch pressure control solenoid valves B and C. |
| 4. | Connect the battery positive terminal to the No. 1 terminal of the A/T clutch pressure control solenoid valves B and C connectors, and connect the battery negative terminal to the No. 2 terminal. A clicking sound should be heard. |
| 5. | If no sound is heard, remove the A/T clutch pressure control solenoid valves B and C. |
| 6. | Check the fluid passage of the A/T clutch pressure control solenoid valve for dust or dirt. |
| 7. | Connect the No. 1 terminal of the A/T clutch pressure control solenoid valves B and C connectors to the battery positive terminal, and connect the No. 2 terminal to the battery negative terminal. Make sure the A/T clutch pressure control solenoid valves B and C move. |
| 8. | Disconnect one of the battery terminals, and check valve movement. NOTE: You can see valve movement through the fluid passage in the mounting surface of the A/T clutch pressure control solenoid valves B and C body. |
| 9. | If either valve binds or moves sluggishly, or if the solenoid valve does not operate, replace the A/T clutch pressure control solenoid valves B and C. |