| 1. | Securely clamp the countershaft assembly in a bench vise with wood blocks. |
| 2. | Remove the special bolt (left-hand threads). |
| 3. | Support ball bearing (A) (5-speed model) or 6th gear (B) (6-speed model) on steel blocks (C), then use a press (D) and an attachment (E) to press the countershaft out of the ball bearing. |
| 4. | Remove the 35 mm shim and distance collar (5-speed model). |
| 5. | Support 4th gear (A) on steel blocks (B), then use a press (C) and an attachment (D) to press the countershaft (E) out of the 5th gear. |
| 6. | Support 2nd gear (A) on steel blocks (B), then use a press (C) and an attachment (D) to press the countershaft (E) out of 3rd gear. |