| DTC B1102: | Door Multiplex Control Unit Internal Error |
| 1. | Clear the DTCs using the Honda PGM Tester or the HDS. |
| 2. | Cycle the ignition switch to OFF and then back ON. |
| 3. | Operate the power window (UP/DOWN). |
| 4. | Check for DTCs by selecting DTCs MENU (DTCs) from the Honda PGM Tester or the HDS. Is DTC B1102 indicated? YES - Faulty door multiplex control unit; replace the power window master switch.n NO - Intermittent failure, the door multiplex control unit is OK at this time.n |