| DTC B1160: | Gauge Control Module Lost Communication (Door Lock Switch Message) with the Door Multiplex Control Unit |
| 1. | Clear the DTC using the Honda PGM Tester or the HDS. |
| 2. | Cycle the ignition switch to OFF and then back ON. |
| 3. | Check the DTCs by selecting the DTCs MENU (DTCs) from the Honda PGM Tester or the HDS. Is DTC B1160 indicated? YES - Go to 4. NO - Intermittent failure. The gauge control system is OK at this time.n |
| 4. | Check the DTCs by the DTCs MENU (DTCs) of the Honda PGM Tester or the HDS. Is DTC B1006 or B1058 indicated? YES - Go to door multiplex control unit input test. |