| DTC B1155: | Gauge Control Module Lost Communication (Headlight Switch Message) with the Combination Switch Control Unit. |
| 1. | Clear the DTC using the Honda PGM Tester or the HDS. |
| 2. | Cycle the ignition switch to OFF and then back ON. |
| 3. | Check the DTCs by selecting the DTCs MENU (DTCs) from the Honda PGM Tester or the HDS. Is DTC B1155 indicated? YES - Go to 4. NO - Intermittent failure. The gauge control system is OK at this time.n |
| 4. | Check the DTCs by selecting the DTCs MENU (DTCs) from the Honda PGM Tester or the HDS. Is DTC B1007 or B1062 indicated? YES - Go to combination switch control unit input test.n |