| DTC B1251: | Combination Switch Control Unit Internal Error |
| 1. | Clear the DTCs using the Honda PGM Tester or the HDS. |
| 2. | Cycle the ignition switch to OFF and then back ON. |
| 3. | Check the DTCs by selecting the DTCs MENU (DTCs) from the Honda PGM Tester or the HDS. Is DTC B1251 indicated? YES - Faulty combination switch control unit; replace the wiper/washer switch.n NO - Intermittent failure, the CPU in the combination switch control unit is OK at this time.n |