| 1. | Remove the passenger's door panel. |
| 2. | Disconnect the 6P connector from the window motor. |
| 3. | Test the motor by connecting battery power and ground according to the table. When the motor stops running, disconnect one lead immediately. |
| 4. | If the motor does not run or fails to run smoothly, replace it. |
| 1. | Remove the rear door panel. |
| 2. | Disconnect the 6P connector from the window motor. |
| 3. | Test the motor by connecting battery power and ground according to the table. When the motor stops running, disconnect one lead immediately. |
| 4. | If the motor does not run or fails to run smoothly, replace it. |