| 1. | Remove the driver's door panel. |
| 2. | Disconnect the 2P connector from the actuator. |
| 3. | Check actuator operation by connecting power and ground according to the table. To prevent damage to the actuator, apply battery voltage only momentarily. |
| 4. | If the actuator does not operate as specified, replace it. |
| 1. | Remove the passenger's door panel. |
| 2. | Disconnect the 2P connector from the actuator. |
| 3. | Check actuator operation by connecting power and ground according to the table. To prevent damage to the actuator, apply battery voltage only momentarily. |
| 4. | If the actuator does not operate as specified, replace it. |