| 1. | Remove the drain channel. |
| 2. | Slide the sunshade (A) until you can see both sunshade slider spacers (B). |
| 3. | Remove the screws, then remove both spacers. |
| 4. | While lifting the front portion of the sunshade (A), move the sunshade forward until you can see both sunshade rear hooks (B). Do not damage the sunshade and hooks. |
| 5. | remove the screws, then remove both hooks. |
| 6. | Remove the sunshade (A). |
| 7. | Remove both front sunshade base sliders (A) and both rear sunshade base sliders (B). |
| 8. | Install the sunshade in the reverse order of removal, and check the glass height adjustment |
| 9. | Check for water leaks. Let the water run freely from a hose without a nozzle. Do not use a high-pressure spray. |