| 1. | Close the glass fully. |
| 2. | Slide the sunshade all the way back. |
| 3. | Pry out the lid (A), remove the screws (B), and release the hooks (C), then remove both bracket covers (D). With a Torx T-25 bit, remove the bolts (E) from both glass brackets (F). |
| 4. | Remove the glass (A) by lifting it up. Do not damage the roof panel. |
| 5. | Install the glass in the reverse order of the removal, and adjust the glass height alignment. |
| 6. | Check for water leaks. Use free-flowing water from a hose without a nozzle. Do not use high-pressure water. |