| 1. | Carefully pry off the lens (A) with a small screwdriver.
|
| 2. | Remove the two mounting screws. |
| 3. | Disconnect connectors (B). |
| 4. | Install the light in the reverse order of removal. |
| 1. | Carefuly pry off the lens (A) with a small screwdriver.
|
| 2. | Remove the two mounting screws. |
| 3. | Diconntct the 3P connector (B) from the housing (C). |
| 4. | Install the light in the reverse order of removal. |